FLYFINE · FW24314
The FLYFINE FW24314 is a wall-mounted LiFePO4 battery with a nominal voltage of 25.6V, a capacity of 314Ah and a rated energy of 8.038kWh. It provides battery storage for compatible 24V solar energy and backup power systems.
Built with Grade A+ lithium iron phosphate cells, the FW24314 combines a battery management system, circuit breaker protection and CAN/RS485 communication. Bluetooth and Wi-Fi monitoring are available as optional functions.
A 314Ah battery at 25.6V nominal voltage provides 8.038kWh of rated energy for compatible 24V storage systems. Select the battery according to both energy demand and power requirements.
New Grade A+ LiFePO4 cells are paired with a BMS and circuit breaker, providing two levels of overcurrent protection.
CAN and RS485 interfaces support compatible inverter communication. Optional Bluetooth and Wi-Fi functions enable monitoring through supported software.
The datasheet specifies at least 8,000 cycles at 25 ± 2°C and 0.5C charge/discharge rates, with an 80% end-of-life capacity threshold. Actual service life depends on operating conditions.
| Parameter | Specification |
|---|---|
| Model | FW24314 |
| Battery Chemistry | Lithium Iron Phosphate (LiFePO4) |
| Installation | Wall-mounted |
| Nominal Voltage | 25.6V |
| Battery Voltage Range | 21.6–28.8V |
| Nominal Capacity | 314Ah |
| Rated Energy | 8.038kWh |
| Standard Charge/Discharge Current | 100A |
| Maximum Charge/Discharge Current | 200A |
| Communication Interfaces | CAN / RS485 |
| Optional Connectivity | Bluetooth / Wi-Fi |
| Self-Discharge | ≤3% per month |
| IP Rating | IP21 |
| Cooling | Natural cooling |
| Cycle Life | ≥8,000 cycles* |
| Charging Temperature | 0°C to 55°C |
| Discharging Temperature | −20°C to 55°C |
| Operating Altitude | 0–4,000m; derating above 2,000m |
*Cycle-life test conditions: 25 ± 2°C, 0.5C charge / 0.5C discharge, with an 80% end-of-life capacity threshold. Specifications follow the product datasheet. Confirm the final configuration and optional functions when ordering.
Store solar energy through compatible inverter and charging equipment for later use. Confirm the battery voltage range and charging settings when integrating the FW24314 into your system.
Pair the battery with a compatible backup-capable inverter to supply selected loads during an outage. Runtime depends on usable energy, load demand and conversion efficiency.
It belongs to the 24V system class. Its nominal voltage is 25.6V, with a specified battery voltage range of 21.6–28.8V.
The datasheet lists 8.038kWh of rated energy. Energy delivered to connected loads depends on discharge settings, battery condition and system conversion losses.
Backup duration depends on connected loads, usable battery energy and inverter efficiency. Share your load list and required backup duration with FLYFINE for system sizing.
Bluetooth and Wi-Fi are optional functions. Confirm your required monitoring configuration when requesting a quotation.
Compatibility depends on the inverter's battery voltage range, charging settings, firmware and communication protocol. Provide the exact inverter brand and model for confirmation.
For distribution and installation projects, send FLYFINE your required quantity, destination market, inverter model and monitoring requirements. Our team can confirm the FW24314 configuration and provide a quotation.
