FLYFINE · FW24100
The FLYFINE FW24100 is a wall-mounted LiFePO4 battery for compatible 24V solar energy storage and backup power systems. It delivers 2.56kWh of rated energy with a nominal voltage of 25.6V and a capacity of 100Ah.
Designed for residential energy storage installations, it combines Grade A+ lithium iron phosphate cells, a battery management system and CAN/RS485 communication. Bluetooth and Wi-Fi monitoring are available as optional functions.
Built with new Grade A+ lithium iron phosphate cells, as specified in the datasheet. The wall-mounted enclosure keeps the battery off the floor and helps organize indoor equipment space.
The battery management system and circuit breaker provide two levels of overcurrent protection. The manual also describes voltage, temperature and short-circuit protection indications.
CAN and RS485 interfaces support compatible inverter communication. Optional Bluetooth and Wi-Fi functions provide battery monitoring through supported software. The Wi-Fi module described in the manual uses 2.4GHz Wi-Fi.
The datasheet specifies at least 6,500 cycles at 25 ± 2°C and 0.5C charge/discharge rates, with an 80% end-of-life capacity threshold. Actual service life depends on operating conditions.
| Parameter | Specification |
|---|---|
| Model | FW24100 |
| Battery Chemistry | Lithium Iron Phosphate (LiFePO4) |
| Installation | Wall-mounted |
| Nominal Voltage | 25.6V |
| Voltage Range | 21.6–28.8V |
| Nominal Capacity | 100Ah |
| Rated Energy | 2.56kWh |
| Standard Charge/Discharge Rate | 0.5C |
| Maximum Charge/Discharge Rate | 1C |
| Depth of Discharge | 90%, as listed in the user manual |
| Communication | CAN / RS485 |
| Optional Connectivity | Bluetooth / Wi-Fi |
| IP Rating | IP21 |
| Cooling | Natural cooling |
| Cycle Life | ≥6,500 cycles at 25 ± 2°C, 0.5C charge / 0.5C discharge, 80% end-of-life capacity |
| Charging Temperature | 0°C to 55°C |
| Discharging Temperature | −20°C to 55°C |
| Storage Temperature | −15°C to 50°C |
| Operating Altitude | 0–4,000m; derating above 2,000m |
| Net Weight | 26kg ± 1kg |
Specifications are based on the linked product datasheet and user manual. Confirm the final configuration, optional functions and specifications when ordering. Cycle-life test conditions shown above follow the datasheet.
Store solar energy through a compatible inverter and charge controller for later use. Charging and discharging behavior depends on the selected system settings.
Pair the battery with a compatible backup-capable inverter to supply selected loads during an outage. Backup duration depends on load demand, usable energy and system efficiency.
The FW24100 belongs to the 24V battery system class. Its nominal voltage is 25.6V and its specified voltage range is 21.6–28.8V. Confirm that your inverter supports this range.
Rated energy is 2.56kWh, calculated from 25.6V × 100Ah. Energy delivered to connected loads depends on discharge settings, battery condition and conversion losses.
The battery has an IP21 rating and should be installed in a suitable protected indoor location. It should not be exposed directly to rain or outdoor weather.
The manual describes parallel connections using matching batteries. Contact FLYFINE to confirm the approved configuration and installation requirements. Series connection is prohibited.
Bluetooth and Wi-Fi are optional functions in the datasheet. Confirm the required monitoring options when ordering. The documented Wi-Fi module supports 2.4GHz networks.
Compatibility depends on battery voltage, inverter firmware and communication protocol. Share your inverter brand and exact model with FLYFINE for confirmation before purchase.
For distribution or installation projects, send FLYFINE your required quantity, destination market, inverter model and preferred monitoring options. Our team can confirm the battery configuration and provide a quotation for your order.
